- Makeup Brushes[10]
- Cement Boards[10]
- Other Wires[4]
- Healthcare Supplies[1]
- Aluminum Strips[6]
- Plastic Sheets[5]
- Communication Cables[10]
eva adhesive film
1)solar cell EVA encapsulating filmfor encapaulating solar modules.
2)Excelent UV
3)damp heat resistance
4)long term perform
Our eva is extremely high transparency, suitable cross link rate, small shrinkage, good humidity & UV light resistance.
EVA film is based on EVA resin which basis to (ethylene and vinyl acetate copolymer resin), by adding a variety of modified additives, through melt extrusion made of the rmosetting hot melt film. Not be sticky in normal temperature, easy to operation. Produced by thermal lamination with the bonding enhanced crosslinking chemical reactions, making silicon wafers, glass, TPT multilayer material consisting of one firm bond as the product of solar panels, in actual outdoor applications up to 25 years life. A large number of applications at home and abroad well-proven solar panels, EVA film is the optimum cost performance, it is difficult to alternative packaging materials for solar cells.
Our EVA film's advantages are as follow:
· High Transmittance
· High Mechanical Strength
· High Adhesion Strength
· High Photo- thermal Stability
· High Cross-linking rate
· User-friendly
Performance | Unit | Test method | EV1050G1 (Fast curing) | UF-EV1050G1 (Ultra-fast curing) | UE-EV1050G1 (Zero shrinkage) |
Density | g/cm3 | ISO 1183 | 0.96 | 0.96 | / |
Melt flow rate | g/10min | ASTM D1238 | 30 | 30 | / |
Transmittance | % | GB/T2410-1980 | 92 | 92.0 | / |
Haze | % | GB/T2410-1980 | 0.26 | 0.21 | / |
Peeling strength | N/cm | GB/T2790-1995 | 70(with glass) 75(with TPT) | 73(with glass) 76(with TPT) | 55(with TPT) |
Crosslink degree | % | Lushan test method | 85 | 88 | / |
Shrinkage Rate(120 C, 3min) | % | Lushan test method | MD ≤4 TD ≤0.2 | MD ≤4 TD ≤0.2 | MD=0 TD=0 |
% | Sanvic test method | MD ≤1 TD ≤ 0.1 | MD ≤1 TD ≤0.1 | MD=0 TD=0 | |
Tensile strength | MPa | ASTM D-638 | 40 | 56 | 65 |
Elongation at break | % | ASTM D-638 | 518 | 633 | 488 |
Young’s Modulus (cured) | Mpa | ASTM D-638 | 4.5 | 4.8 | 4.0 |
Hardness | Shore A Shore D | GB/T531—1999 GB/T531—1999 | 76 23 | 74 21 | 90 27 |
Water Absorption | % | GB/T1034-1998 | 0.02 | 0.01 | 0.02 |
Volume Resistivity | Ω.cm | GB/T1410-2006 | 1.57×1014 | 1.68×1014 | 2.78×1014 |
UV Light resistance (280nm~385nm, 15KWh·m-2) | YI. | GB2409-1980 | ≤0.4 | ≤0.4 | ≤0.4 |
Heat/humidity resistance (85°C/85RH, 2000h) | YI. | GB2409-1980 | ≤2 | ≤2 | ≤2 |
Artificially-accelerating aging (3000hour, Xenon light,63°C, 65%) | YI. | GB2409-1980 | ≤2 | ≤2 | ≤2 |
Resistance to temperature (from -40°C to 85°C,50cycles) | YI. | GB2409-1980 | ≤2 | ≤2 | ≤2 |
Resistance to temperature and Moisture (from -40°C to 85°C,85%,10cycles) | YI. | GB2409-1980 | ≤2 | ≤2 | ≤2 |